Accessories

NIBP Adapters - Each SimCube order includes your choice of one (1) NIBP adapter. Each Pronk Complete Vital Signs Simulation System Kit (SC-5+OXSLIMKIT, SC-5+OXKIT, SC-5KIT, SC-4KIT) includes all five (5) NIBP adapters. Extra adapters may be ordered at an additional cost of $40. Five adapter types are available (note that this is not a definitive guide to which adapters are used for all monitor types):

			DINAMAP/Critikon style: A threaded screw-on connector, used on Critikon and MDE monitors. P/N ADAPT-D order
			Marquette style: A freely-rotating twist-on connector, used on GE/Marquette monitors. P/N ADAPT-M order
			Quick Disconnect: A push-pull quick disconnect connector used on HP monitors. P/N ADAPT-Q order
			Luer: A friction-based connector used on Spacelab monitors and most neonatal monitors. P/N ADAPT-L order
			Bulb Adapter: This hand bulb adapter is utilized in static calibration, as well as in Peak Detect (Overpressure) Mode for SimCube models SC-3, SC-4 and SC-5. P/N ADAPT-B order

IBP Adapters* - Each SC-5+OXSLIMKIT, SC-5+OXKIT, and SC-5KIT includes your choice of IBP adapter cable. Extra adapter cables may be ordered at an additional cost of $80. Seven adapter cable types are available (note that this is not a definitive guide to which adapter cables are used for all monitor types):

P/N IBP-GE			GE style for GE, Marquette Rectangle, 11 pin, Male order
P/N IBP-MDE			MDE/Spacelabs style for MDE, Spacelabs, Welch Allyn, Protocol, Older Critikon Dinamap Round, 6 pin, Male order
P/N IBP-Philips			Philips style for HP, Merlin, Philips, Agilent Round, 8 pin, Male order
P/N IBP-Datascope			Datascope style Round, 6 pin, Female order
P/N IBP-Datex			Datex-Ohmeda style Round, 10 pin, Female order
P/N IBP-Draeger	(image not available)	(image not available)	Draeger style Round, 10 pin, male order
P/N IBP-Nihon Kohden	(image not available)	(image not available)	Nihon Kohden style Round, 6 Pin, male order

* Note: Adapters are "stubs" that connect to the 6-ft. IBP extension cable (see image at right), which is included in the SC-5+OXSLIM KIT, SC-5+OX KIT, and SC-5 KIT. This configuration reduces bulk when carrying multiple adapters.

Additional Accessories

	Battery Boost - The Battery Boost (shown here as part of the SC-4KIT) includes both our Battery Boost module and a specially-modified carrying case. The Battery Boost module produces the 6V supply required by the SimCube from a set of 4 "AA" alkaline or NiMH batteries. The 6V output is maintained even as the battery voltage drops from 6V down to around 3V during discharge, providing for 150-250 accurate NIBP simulations from a single set of batteries. The case also provides storage for all NIBP adapters as well as the Bulb Adapter, spare batteries, and AC adapter. The Battery Boost module slides easily out of the case for quick battery replacement. The AC adapter is stored in a convenient outside zip pocket, and the Battery Boost module automatically switches to AC operation whenever the unit is plugged in. AC status and battery status are shown on the Battery Boost module LED display. Compatible with SimCube models SC-3, SC-4, and SC-5. $375 Upgrade your SimCube order
	Cuff Jacket (Cuff Jacket Duo) - Slide the NIBP cuff inside our patent-pending Cuff Jacket to create a controlled and repeatable cuff volume without the need for bulky mandrels. Use of the larger Cuff Jacket is suggested for optimum repeatability on most monitors. The small Cuff Jacket is required on a few older NIBP monitors such as Welch Allyn 52000 series. NOTE: The Cuff Jacket Duo includes both sizes. $40 order
	Bulb Adapter (ADAPT-B) - This hand bulb adapter is utilized in static calibration, as well as in Peak Detect (Overpressure) Mode for SimCube models SC-3, SC-4 and SC-5. $40 order
	Large Nylon Carrying Case for SC-5 (SC-5 +OXSLIM CASE) - The larger SC-5 case is included with the SC-5KIT and is a perfect choice to carry the SC-5 with multiple IBP Cable Adapters. It is also ideal for other SimCube models if you have other gear you wish to carry with your SimCube. Includes shoulder strap. $60 order
	ECG Extender Module (ECG-EXTEND) - The SimCube SC-2, SC-4 and SC-5 models include 10 snaps on the side for 12-lead ECG, Respiration and Pacer simulation. If using 12-lead clips (such as Astro-Trace^TM clips), 4mm banana plugs, or 1/8" banana plugs instead of snaps to connect to the SimCube, the ECG Extender Module with its patented, grooved housing is recommended. $125 order

Order Accessories

—————————————————————————————————————————

Terms and Conditions
Copyright ©2009 Pronk Technologies Inc.
All Rights Reserved